From: MASK (afaqk@xxxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 18:06:57 GMT-3
hi,
i cant go to the ROMMON mode, cause it doesn't allow
to break(ctl-brk) via AUX port, only via CON port.
i think my router has "no enable password" and/or "no
enable secret", thats why when i log-in via AUX, and
type "en", it says "%No Password Set".
bbye
--- frank wells <fwells12@hotmail.com> wrote:
> Reboot the router and get to ROMMON. Change the
> config register to 0x2142.
> Reload the router, it will boot normally but it will
> not start the startup
> script. Log on as normal. Go to 'line aux 0' and
> type in 'transport input
> all', 'modem inout', 'login' and password xxxx' Once
> you have done that,
> change the config register back to 0x2102 and reboot
> it again. Make sure
> you have are plugged into the aux port with your
> terminal emulation program.
> You will now have access to the router just like
> over the console port.
>
>
>
>
> >From: MASK <afaqk@rocketmail.com>
> >Reply-To: MASK <afaqk@rocketmail.com>
> >To: ccielab@groupstudy.com
> >Subject: challenge q
> >Date: Mon, 26 Feb 2001 12:25:45 -0800 (PST)
> >
> >hi,
> >
> >I've a router (2501), whose Console port is faulty,
> >and its AUX port has an unknown password set onto
> it,
> >and to make the matter worse its all interfaces are
> >shut down, so we cant even telnet to it!!
> >
> >anyone has got any clue??? how can i make this
> router
> >usable?
> >
> >i know many gr8 minds are on this list!!
> >
> >thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:03 GMT-3