From: MChao (michelle_chao_2000@xxxxxxxxx)
Date: Tue Feb 27 2001 - 18:58:12 GMT-3
Hi, all,
I am studying DLSW+. I found a conflict about "linger"
settings of DLSW+ on different links. Does anyone know
which one is correct? I haven't got chance to test it
yet. If someone could tell me, I'd appreciate.
Thanks!
On the following link, it says
"set linger to 0, all existing sessions on the backup
router immediately drop when the primary recovers. If
the linger keyword is omitted, all existing sessions
on the backup router remain active (as long as the
session is active) when the primary recovers"
http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr/ibm_c/bcprt2/bc
ddlsw.htm
On the following link
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/prodlit/dlswa_rg.pdf
<Page 3-10>
"Setting the linger keyword to 0 will cause sessions
on Router B to remain active until they terminate on
their own. Omitting the linger keyword will cause all
sessions to drop immediately from Router B as soon as
Router A recovers."
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:08 GMT-3