From: Mark Salmon (masalmon@xxxxxxxxx)
Date: Wed Feb 28 2001 - 11:49:20 GMT-3
If that is the case, would he be able to make a neighbor relationship between
the hub and spokes? Would not the output of the show ip ospf neighbor be init
or exstart rather than full? That is a frequent gotcha though so one must pay
attention to that.
"Feliz, Edgar (CRTRES-NY)" wrote:
> Steven,
>
> Check your OSPF network type for these routers most probably you need to
> make them P2M. But pasting the configs will help.
>
> EF
>
> CCIE #6898
>
> -----Original Message-----
> From: Steven Weber [mailto:itweber@earthlink.net]
> Sent: Tuesday, February 27, 2001 10:42 PM
> To: CCIE GROUP
> Subject: can't see OSPF routes..
>
> I have this really weird problem, r5 is the hub r3 and r6 are spokes. r5
> has formed an adjacency with both of them, however none of their routes are
> showing up on r5? Can someone please shed some light?
>
> Thanks,
>
>
>
> --- Steven Weber
>
> --- itweber@earthlink.net
>
> --- EarthLink: It's your Internet.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:09 GMT-3