From: Fred Nielsen (fred_nielsen@xxxxxxxxxxx)
Date: Wed Feb 28 2001 - 14:48:11 GMT-3
Don't forget your candidate ID either ;)
At 2/26/2001 09:49 PM, Chuck Larrieu wrote:
>You mean we're expected to remember all that stuff?
>
>Does that mean we're supposed to know that routing is layer 3 and bridging /
>switching is layer 2? Subnetting? TCP ports? IP protocol numbers? How to
>start a routing process? How to make an interface active? How to place an
>interface into OSPF? How to place a network into RIP? What a default route
>is? How to read a debug trace? What the various show commands do?
>
>Bummer!
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Peter
>Sent: Monday, February 26, 2001 8:31 PM
>To: Scott Schneidewind; ccielab@groupstudy.com
>Subject: Re: Administrative Distances
>
>This is a topic covered on the written qualification exam (and CCNA for that
>matter) and it is expected that you know the major ones like
>bgp - 20/200
>rip - 120
>ospf - 110
>igrp - 100
>eigrp - 90/170
>isis - 115
>
>----- Original Message -----
>From: "Scott Schneidewind" <sfscott@hotmail.com>
>To: <ccielab@groupstudy.com>
>Sent: Monday, February 26, 2001 6:42 PM
>Subject: Administrative Distances
>
>
>> <html><DIV>I would like to have a reference sheet with all the default
>distances when taking my test.</DIV>
>> <DIV>Is there a place on the universecd or in a router that lists
>these?</DIV>
>> <DIV> </DIV>
>> <DIV>Thanks,</DIV>
>> <DIV>Scott</DIV><br clear=all><hr>Get your FREE download of MSN Explorer
>at <a
>href="http://explorer.msn.com">http://explorer.msn.com><br></p></html>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:09 GMT-3