From: Erick B. (erickbe@xxxxxxxxx)
Date: Wed Feb 28 2001 - 16:00:32 GMT-3
You would have to connect to R1 through the access
server then from there reverse telnet out the AUX
port.
OR if R4/R5/R6 are on the network you can telnet to
them directly on the line # for the aux. 2000 + line
#.
ie: telnet x.x.x.x 20xx
Do a 'show line' to find out the line #.
--- Norberto Padin <npadin@cisco.com> wrote:
> Hello group.
> Since I'm running out of access server console
> ports, I'd like to use AUXs
> ports to concentrate CON ports from other routers.
> Does anybody know how can achieve this?
> ____ #1_______ [CON R1_____AUX
> R1]________[CON R4]
> Access Server /_____#2_______ [CON R2_____AUX
> R2]________[CON R5]
> \_____#3_______ [CON R3_____AUX
> R3]________[CON R6]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:09 GMT-3