From: DuBell, Robert ITC J633CT1 (dubell@xxxxxxxxx)
Date: Tue Apr 03 2001 - 15:01:28 GMT-3
These are the only aruguments i could find for service exec command. Dont'
know what Service internal is. What IOS are you working with ?
RouterA(config)#service ?
compress-config Compress the configuration file
config TFTP load config files
decimal-tty Interpret tty line numbers in decimal.
exec-wait Delay EXEC startup on noisy lines
finger Allow responses to finger requests
hide-telnet-addresses Hide destination addresses in telnet command
linenumber enable line number banner for each exec
nagle Enable Nagle's congestion control algorithm
old-slip-prompts Allow old scripts to operate with slip/ppp
pad Enable PAD commands
password-encryption Encrypt system passwords
prompt Enable mode specific prompt
tcp-keepalives-in Generate keepalives on idle incoming network
connections
tcp-keepalives-out Generate keepalives on idle outgoing network
connections
tcp-small-servers Enable small TCP servers (e.g., ECHO)
telnet-zeroidle Set TCP window 0 when connection is idle
timestamps Timestamp debug/log messages
udp-small-servers Enable small UDP servers (e.g., ECHO)
-----Original Message-----
From: Lee R. Riviere [mailto:lee@citlink.net]
Sent: Tuesday, April 03, 2001 1:53 PM
To: ccielab@groupstudy.com
Subject: Service internal
Does anyone know what the command "service internal" does? I have checked
CCO
and it is undocumented, I know the default is no service internal, and I
had
a problem with a router that had it enabled. Any help would be appreciated.
On another note I am going to brazil for my next attempt on the lab, can
anyone tell me what it's like in Brazil that has already been there.
Thanks,
Lee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3