From: Lachlan Kidd (lkidd@xxxxxxxxxxxxxxxxxxx)
Date: Thu Apr 05 2001 - 07:15:04 GMT-3
Hi Oscar,
The rule is as follows..
1. If you do not have a full IBGP mesh, synch should be left on. The only
way to propagate the routes is via redistributing into an IGP.
2. If you do have a full mesh you can disable synch.
HTH
Lachlan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Oscar Diaz Poveda
Sent: Thursday, 5 April 2001 7:49:PM
To: ccielab@groupstudy.com
Subject: BGP design
Dear all,
Inside an AS where there are routers that are not running IBPG:
When you should redistribute BGP into the IGP and when you should turn off
synchronization???
Thank you for your advice in advance.
Best regards,
Oscar.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3