From: Jim Graves (jtg@xxxxxxxxxx)
Date: Mon Apr 09 2001 - 09:33:29 GMT-3
If you're running IPX RIP, then split-horizon is your problem. The
split-horizon problem occurs in both EIGRP and RIP over hub-and-spoke
parital mesh; but you can only turn off split-horizon using IPX
EIGRP. There's no knob to turn it off in IPX RIP.
At 11:19 PM 4/8/2001 -0700, fwells12 wrote:
>Can anyone explain why I am able to see all IPX networks from the hub (r5) but
>I am unable to see IPX network 34 on r3 from r2 and likewise, IPX network 12
>on r2 from r3? The spoke routers are r2 and r3, the hub router is r5. I can
>ipx ping the spokes from each other. I am not running IPX EIGRP over the
>cloud in case your thinking split-horizon.
>
>Here are the relevant parts of the configs. TIA.
>
>interface Tunnel25
> no ip address
> tunnel source Serial0
> tunnel destination 133.6.10.22
>!
>interface Tunnel35
> no ip address
> tunnel source Serial0
> tunnel destination 133.6.10.23
>!
>interface Ethernet0
> mac-address 0005.0005.0032
> ip address 133.6.100.5 255.255.255.0
> ipx network 32
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> no ip mroute-cache
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
>!
>interface Serial0.1 multipoint
> ip address 133.6.10.25 255.255.255.240
> ipx network 35
> frame-relay map ip 133.6.10.22 102 broadcast
> frame-relay map ip 133.6.10.23 103 broadcast
>
>r2
>interface Tunnel25
> no ip address
> tunnel source Serial0
> tunnel destination 133.6.10.25
>!
>interface Serial0
> ip address 133.6.10.22 255.255.255.240
> ipx network 35
>!
>interface Serial1
> ipx network 12
>
>r3
>interface Tunnel35
> no ip address
> tunnel source Serial0
> tunnel destination 133.6.10.25
>!
>interface Serial0
> ip address 133.6.10.23 255.255.255.240
> ipx network 35
>!
>interface Ethernet0
> mac-address 0003.0003.0034
> ipx network 34
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3