From: HENDERSON_DAVE_G@xxxxxxxxx
Date: Fri Apr 13 2001 - 08:39:03 GMT-3
>From your question I assume this is NOT a Frame Relay circuit. If it's a
real T1 I also assume the provider is giving you clock. I've seen this
when I had an issue with my receive leg from the physical standpoint. We
were seeing AIS errors.
Eric Hauptman <ehauptma@home.com>
Sent by: nobody@groupstudy.com
04/13/01 04:24 AM
Please respond to Eric Hauptman
To: Groupstudy <ccielab@groupstudy.com>
cc:
Subject: OT: Point to Point Serial link
I have a production network where one side of a point to point serial
link is showing up/down and the other side is showing up/up. I thought
that if one side went down they would both go down. I know on frame
relay one can be up/up and the other down, but I thought on a point to
point this would not be the case. Am I missing something basic here? I
am running the T1s into 2610 routers with built in WIC-T1-CSUs.
Thanks.
Eric
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:45 GMT-3