From: David Siwula (DSiwula@xxxxxxxx)
Date: Wed Apr 18 2001 - 18:38:55 GMT-3
Probably need to upgrade ios.
Dave
-----Original Message-----
From: Dean, Justin [mailto:Justin.Dean@nrtinc.com]
Sent: Wednesday, April 18, 2001 2:36 PM
To: 'ccielab@groupstudy.com'
Subject: ISL on 3640 with NM-1FE1R2W in slot 1
Hi,
I am trying to setup ISL on on a Fast Ethernet port of a 3640 and I am
not
getting the option of encapsulation under the interface fa1/0 or
fa1/0.1.
Does anyone know of any bugs or am I missing something here? Here is
what I
am seeing:
Thanks,
justin
Rack1R6(config)#int fa1/0
Rack1R6(config-if)#?
Interface configuration commands:
access-expression Build a bridge boolean access expression
arp Set arp type (arpa, probe, snap) or timeout
backup Modify backup parameters
bandwidth Set bandwidth informational parameter
bridge-group Transparent bridging interface parameters
carrier-delay Specify delay for interface transitions
cdp CDP interface subcommands
cmns OSI CMNS
custom-queue-list Assign a custom queue list to an interface
default Set a command to its defaults
delay Specify interface throughput delay
description Interface specific description
duplex Configure duplex operation.
exit Exit from interface configuration mode
fair-queue Enable Fair Queuing on an Interface
full-duplex Configure full-duplex operational mode
half-duplex Configure half-duplex and related commands
help Description of the interactive help system
hold-queue Set hold queue depth
ip Interface Internet Protocol config commands
keepalive Enable keepalive
llc2 LLC2 Interface Subcommands
load-interval Specify interval for load calculation for an
interface
logging Configure logging for interface
loopback Configure internal loopback on an interface
mac-address Manually set interface MAC address
max-reserved-bandwidth Maximum Reservable Bandwidth on an Interface
mls mls router sub/interface commands
mtu Set the interface Maximum Transmission Unit
(MTU)
multilink-group Put interface in a multilink bundle
netbios Use a defined NETBIOS access list or enable
name-caching
no Negate a command or set its defaults
ntp Configure NTP
priority-group Assign a priority group to an interface
random-detect Enable Weighted Random Early Detection (WRED)
on
an Interface
rate-limit Rate Limit
service-policy Configure QoS Service Policy
shutdown Shutdown the selected interface
snapshot Configure snapshot support on the interface
snmp Modify SNMP interface parameters
speed Configure speed operation.
standby Hot standby interface subcommands
timeout Define timeout values for this interface
traffic-shape Enable Traffic Shaping on an Interface or
Sub-Interface
transmit-interface Assign a transmit interface to a receive-only
interface
tx-queue-limit Configure card level transmit queue limit
Rack1R6(config-if)#int fa1/0.1
Rack1R6(config-subif)#?
Interface configuration commands:
arp Set arp type (arpa, probe, snap) or timeout
backup Modify backup parameters
bandwidth Set bandwidth informational parameter
bridge-group Transparent bridging interface parameters
carrier-delay Specify delay for interface transitions
cdp CDP interface subcommands
default Set a command to its defaults
delay Specify interface throughput delay
description Interface specific description
exit Exit from interface configuration mode
ip Interface Internet Protocol config commands
llc2 LLC2 Interface Subcommands
mls mls router sub/interface commands
mtu Set the interface Maximum Transmission Unit (MTU)
netbios Use a defined NETBIOS access list or enable
name-caching
no Negate a command or set its defaults
ntp Configure NTP
rate-limit Rate Limit
service-policy Configure QoS Service Policy
shutdown Shutdown the selected interface
snapshot Configure snapshot support on the interface
standby Hot standby interface subcommands
timeout Define timeout values for this interface
traffic-shape Enable Traffic Shaping on an Interface or
Sub-Interface
System image file is "flash:c3640-i-mz.120-7.xk2.bin"
cisco 3640 (R4700) processor (revision 0x00) with 93184K/5120K bytes of
memory.
Processor board ID 15171690
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)
Configuration register is 0x2102
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:50 GMT-3