From: Walter Chen (wchen@xxxxxxxxx)
Date: Thu Apr 19 2001 - 19:53:58 GMT-3
You can apply a lsap list on token-ring or Ethernet interfaces. For
token-ring, you do
source-bridge input(output)-lsap-list 200
For Ethernet, you do
bridge-group 1 input(output)-lsap-list 200
access-list 200 perm 0x0404
access-list 200 perm 0x0D0D
-----Original Message-----
From: Elias Aggelidis [mailto:eaggel@algo.com.gr]
Sent: Thursday, April 19, 2001 6:42 PM
To: Johnny Dedon; Ccielab@Groupstudy.Com
Subject: RE: DLSW+ question : ROUTERX SHOULD SEND SNA TRAFFIC ONLY.
OK ,
this it will worked if your router is allowed
to have remote-peers statements.
But what about IF YOUR ROUTER IS WORKING IN PROMISCIOUS MODE ?
Have any one found another way to do it ?
Regards
Elias
****************************************************************
Elias Aggelidis ALGOSYSTEMS SA
Senior Network Engineer 4, Sardeon Str
CCNA, CCNP Nea Smyrni
CVOICE, Security Specialised
PICA Administrator
Athens 17121
tel: +301-9310281 GREECE
fax: +301-9352873
email: eaggel@algo.com.gr
****************************************************************
-----Original Message-----
From: Johnny Dedon [mailto:johnny.dedon@exodus.net]
Sent: Paqasjeu^, 20 Apqik_ou 2001 1:38 pl
To: Elias Aggelidis; Ccielab@Groupstudy.Com
Subject: Re: DLSW+ question : ROUTERX SHOULD SEND SNA TRAFFIC ONLY.
Elias,
I think what they want here is access-list 200 permit 0x0404 0x0D0D applied
with lsap-output-list 200 on the dlsw remote-peer statement.
----- Original Message -----
From: "Elias Aggelidis" <eaggel@algo.com.gr>
To: "Ccielab@Groupstudy.Com" <ccielab@groupstudy.com>
Sent: Thursday, April 19, 2001 5:08 PM
Subject: DLSW+ question : ROUTERX SHOULD SEND SNA TRAFFIC ONLY.
> Dear Group,
>
> I am trying to implement the following question.
>
> Router X should only send SNA traffic. (You may assume that the only SAP
> we are interesting is 0x04, 0x08).
>
> In real life I would have use the following command
>
> dlsw icanreach saps 04 08
>
> Which means that the router can reach only this SAPs and nothing else
>
> ( This is what the command is doing as it is discribed on the Documention
CD
> > This command can be entered at any time. It causes a capabilities
> exchange
> > to relay the information to all active peers. By specifying resource
> names or
> > MAC addresses in this command, you can avoid broadcasts from remote
peers
> > that are looking for this resource. By specifying "exclusive" you can
> > avoid broadcasts to this router or any resources. For example, you
could
> > configure the front-end processor (FEP) MAC address or corporate site
LAN
> > servers in central site routers to avoid any broadcasts over the WAN
> > for these resources.
> )
>
> After applying the command on the router, the dlsw local capabilities has
> been changed to the follow output :
>
> Rack7R5#sh dlsw capabilities local
> DLSw: Capabilities for local peer 133.77.5.5
> vendor id (OUI) : '00C' (cisco)
> version number : 2
> release number : 0
> init pacing window : 20
> unsupported saps : 0 2 6 A C E 10 12 14 16 18 1A 1C 1E 20 22 24
26
> 28 2A 2C 2E 30 32 34 36 38 3A 3C 3E 40 42 44 46 48 4A 4C 4E 50 52 54 56 58
> 5A 5C 5E 60 62 64 66 68 6A 6C 6E 70 72 74 76 78 7A 7C 7E 80 82 84 86 88 8A
> 8C 8E 90 92 94 96 98 9A 9C 9E A0 A2 A4 A6 A8 AA AC AE B0 B2 B4 B6 B8 BA BC
> BE C0 C2 C4 C6 C8 CA CC CE D0 D2 D4 D6 D8 DA DC DE E0 E2 E4 E6 E8 EA EC EE
> F0 F2 F4 F6 F8 FA FC FE
> num of tcp sessions : 1
> loop prevent support : no
> icanreach mac-exclusive : no
> icanreach netbios-excl. : no
> reachable mac addresses : none
> reachable netbios names : none
> V2 multicast capable : yes
> DLSw multicast address : none
> cisco version number : 1
> peer group number : 0
> border peer capable : no
> peer cost : 3
> biu-segment configured : no
> UDP Unicast support : yes
> NetBIOS Namecache length : 15
> current border peer : none
> version string :
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.0(16), RELEASE SOFTWARE
> (fc2)
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Sat 03-Mar-01 00:38 by dchih
>
> As you can see, the router does not support any other SAPs expect 04, 08.
> So NETBios 0F and Novel 0E would not pass.
>
> IS THIS WHAT THE TEST WANTS ??
> IS THIS THE CORECT TECHNOLOGY ??
>
> Regards
>
> Elias
>
> ****************************************************************
> Elias Aggelidis ALGOSYSTEMS SA
> Senior Network Engineer 4, Sardeon Str
> CCNA, CCNP Nea Smyrni
> CVOICE, Security Specialised
> PICA Administrator
> Athens 17121
> tel: +301-9310281 GREECE
> fax: +301-9352873
> email: eaggel@algo.com.gr
> ****************************************************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:51 GMT-3