From: Haohong Lin (hhlin@xxxxxxxxxx)
Date: Wed Apr 25 2001 - 00:09:41 GMT-3
Hi, Hopkns
My routers' IOS version is js-12.0(6)T. Maybe my laptop doesn't enable
NetBEUI. I'll try it using netbeui. Thank a lot.
Regards,
Haohong Lin
-----Original Message-----
From: Rob Hopkins [mailto:rshopkins@earthlink.net]
Sent: 2001 04 25 12:25
To: Haohong Lin
Subject: Re: NetBios with DLSw
you should be able to access both directions via a workstation name,
assuming netbui is enabled. I ran into a similar problem with two routers,
I could access one way, but not the other, I replaced one of the routers and
had the
same exact problem. My R1 was 11.3 and other two 11.1
i upgraded my 11.3 code to:
c2500-js-l.113-11a.bin
and everything started to work..
good luck..
Rob Hopkins
----- Original Message -----
From: "Haohong Lin" <hhlin@szskzj.com>
To: "CCIELab" <ccielab@groupstudy.com>
Sent: Tuesday, April 24, 2001 10:20 PM
Subject: NetBios with DLSw
> Hi,
>
> When I configure DLSw with transparent bridge between two router.
> My laptop "H1" cann't reach for any host on LAN2.
>
> On R1, it can find lots of host in reachability cache.
>
> R1#sh dlsw rea
> DLSw Local MAC address reachability cache list
> Mac Addr status Loc. port rif
> 0008.de5c.6477 FOUND LOCAL TBridge-001 --no rif--
>
> DLSw Remote MAC address reachability cache list
> Mac Addr status Loc. peer
> 0001.1351.f39e FOUND REMOTE 10.1.10.36(2065)
> 0001.13b1.5a37 FOUND REMOTE 10.1.10.36(2065)
> 0001.13b1.5ac5 FOUND REMOTE 10.1.10.36(2065)
> 0001.13b1.eb57 FOUND REMOTE 10.1.10.36(2065)
> 0001.13b1.eb67 FOUND REMOTE 10.1.10.36(2065)
> 0003.fb44.3d8b FOUND REMOTE 10.1.10.36(2065)
> 0003.fb44.6b52 FOUND REMOTE 10.1.10.36(2065)
> 0003.fb44.6beb FOUND REMOTE 10.1.10.36(2065)
> 0003.fb44.9b54 FOUND REMOTE 10.1.10.36(2065)
> 0005.9357.d562 FOUND REMOTE 10.1.10.36(2065)
> 0006.0dd9.8935 FOUND REMOTE 10.1.10.36(2065)
> 0006.2933.40ab FOUND REMOTE 10.1.10.36(2065)
> 0008.5a76.df19 FOUND REMOTE 10.1.10.36(2065)
> 0008.5a76.df39 FOUND REMOTE 10.1.10.36(2065)
> 000a.45ef.3233 FOUND REMOTE 10.1.10.36(2065)
> 000a.5d73.2ba2 FOUND REMOTE 10.1.10.36(2065)
> 000a.5d97.2521 FOUND REMOTE 10.1.10.36(2065)
> 000a.5d97.59d4 FOUND REMOTE 10.1.10.36(2065)
> 000a.5d97.f999 FOUND REMOTE 10.1.10.36(2065)
> 000a.5dd7.d7b5 FOUND REMOTE 10.1.10.36(2065)
> 000a.5de7.9ee5 FOUND REMOTE 10.1.10.36(2065)
> 000a.5df3.7c01 FOUND REMOTE 10.1.10.36(2065)
> 000a.5df3.f271 FOUND REMOTE 10.1.10.36(2065)
> 000b.60c5.f6df FOUND REMOTE 10.1.10.36(2065)
> 000b.9e54.3d00 FOUND REMOTE 10.1.10.36(2065)
> 000b.ed10.6346 FOUND REMOTE 10.1.10.36(2065)
> 000b.ed10.85be FOUND REMOTE 10.1.10.36(2065)
>
> DLSw Local NetBIOS Name reachability cache list
> NetBIOS Name status Loc. port rif
>
> DLSw Remote NetBIOS Name reachability cache list
> NetBIOS Name status Loc. peer
> DNS FOUND REMOTE 10.1.10.36(2065)
> FQWAN FOUND REMOTE 10.1.10.36(2065)
> HANGYF FOUND REMOTE 10.1.10.36(2065)
> HY FOUND REMOTE 10.1.10.36(2065)
> JLZHOU FOUND REMOTE 10.1.10.36(2065)
> KUNFUNT FOUND REMOTE 10.1.10.36(2065)
> LEIHUANG FOUND REMOTE 10.1.10.36(2065)
> NINGZHU1 FOUND REMOTE 10.1.10.36(2065)
> XNWU FOUND REMOTE 10.1.10.36(2065)
> YFZHU FOUND REMOTE 10.1.10.36(2065)
> YIBAI FOUND REMOTE 10.1.10.36(2065)
> ZHY2 FOUND REMOTE 10.1.10.36(2065)
> ZIJIN-NETBANK FOUND REMOTE 10.1.10.36(2065)
>
> and I can resolve the host name via ping:
>
> C:\WINDOWS>ping -a 10.1.1.188
>
> Pinging ZIJIN-NETBANK [10.1.1.188] with 32 bytes of data:
>
> Reply from 10.1.1.188: bytes=32 time=14ms TTL=124
> Reply from 10.1.1.188: bytes=32 time=14ms TTL=124
> Reply from 10.1.1.188: bytes=32 time=28ms TTL=124
> Reply from 10.1.1.188: bytes=32 time=13ms TTL=124
>
> Ping statistics for 10.1.1.188:
> Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
> Approximate round trip times in milli-seconds:
> Minimum = 13ms, Maximum = 28ms, Average = 17ms
>
> C:\WINDOWS>
>
> I can reach host "zijin-netbank" via dos prompt command "start
> \\10.1.1.188".
> But I search for the host "zijin-netbank" via Windows, found nothing.
>
> -----QUESTION -----------------------------------------
> Question:
> Can I search host on LAN 2 using hostname?
>
> Thank in advance.
>
> |
> H1-+
> | dlsw
> |
> +-- R1---------------/
|
> | /---------------------------R2---+
LAN2
> |
> |
>
>
> R1:
> dlsw local-peer peer-id 172.30.20.2
> dlsw remote-peer 0 tcp 10.1.10.36
> dlsw bridge-group 1
> !
> !
> interface Ethernet0
> ip address 172.30.20.2 255.255.255.0
> bridge-group 1
>
> interface Serial1
> ip address 172.30.10.1 255.255.255.0
> clockrate 2000000
> !
> router eigrp 1
> network 172.30.0.0
> no auto-summary
> !
> bridge 1 protocol ieee
> !
>
> R2:
>
> dlsw local-peer peer-id 10.1.10.36
> dlsw remote-peer 0 tcp 172.30.20.2
> dlsw bridge-group 1
> !
> !
> interface Ethernet0
> ip address 10.1.10.36 255.255.0.0
> bridge-group 1
> !
> interface Serial1
> ip address 172.30.10.2 255.255.255.0
> !
> router eigrp 1
> network 172.30.0.0
> network 10.0.0.0
> no auto-summary
> !
> bridge 1 protocol ieee
>
>
>
>
> Regards,
>
> Haohong Lin
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:55 GMT-3