From: Andrew Chong (achong@xxxxxxxxxxxxxx)
Date: Mon Apr 30 2001 - 21:34:19 GMT-3
Niall,
Neighbor statement is required unless you use "ip ospf network broadcast"
or "ip ospf network point-to-multipoint"
andrew
----- Original Message -----
From: "Niall El-Assaad" <nelassaa@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 01, 2001 9:39 AM
Subject: OSPF: Do frame relay main interfaces need neighbor statements
(default)
> Hi,
>
> If I configure frame-relay interfaces like
>
> int s0
> encapsulation frame-relay
> frame-relay map ip 192.168.1.1 100 broadcast
> ip address 192.168.1.2 255.255.255.0
>
> router ospf 1
> network 192.168.1.1 0.0.0.0 area 0
>
> Then adjacencies do not form. I can see the hello packets going accross
the
> link (deb ip pack).
>
> If I add neighbor statements it works fine.
>
> Are neighbor statements needed? From Doyle it says they are only needed
pre
> 10.0. (page 558).
>
> I know about using point-to-multipoint. But just want to know if neighbors
> are essential on all versions of software.
>
> cheers,
>
> niall
>
>
> =======================================================
> Niall El-Assaad, Systems Engineer
> EMEA-UK Retail Finance North
>
> C i s c o S y s t e m s Mobile: +44 (0)772 088 4650
> VMail: +44 (0)208 734 4206
> | | Fax: +44 (0)161 864 4508
> | |
> ||| |||
> .:|||||:..:|||||:. E-mail: nelassaa@cisco.com
> ------------------ Web : http://www.cisco.com
>
> Crescent House, Towers Business Park, Wilmslow Road,
> Didsbury, Manchester M20 2JE, United Kingdom
> ========================================================
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:03 GMT-3