From: Masood Malik (malikm24@xxxxxxxxxxx)
Date: Sat May 05 2001 - 11:17:31 GMT-3
Mohamed,
Use point-to-point sub interfaces on all routers in NBMA cloud (frame
relay). NLSP doesnot work on physical frame relay interfaces or loopback
interfaces.
regards
masood
----- Original Message -----
From: "Mohamed Heeba" <MAHeeba@itqan.co.ae>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 02, 2001 7:58 AM
Subject: nlsp problem
> guys ;
> im configuring nlsp over frame hub/spoke all physical interfaces are used
.
>
> None of the routers are able to get the adjancy .
> im not able to enable the nlsp over the interface ,the router reject the
> command .
> the question is
> how can i get nlsp run over frame relay ?? here is my configs .
> notes: that the frame relay cloud and the router interfaces are in area 3
of
> the nlsp,the frame pvcs are showing active
>
>
>
> spoke 1
>
> ipx routing 0000.0000.0003
> ipx internal-network BB3300
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip mroute-cache
> bandwidth 64
> ipx network BBBB00
> no fair-queue
> frame-relay map ipx BBBB00.0000.0000.0002 102 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface TokenRing0
> no ip address
> no ip mroute-cache
> ipx network BBAA00 encapsulation SNAP
> ring-speed 16
> !
> !
> ip classless
> no logging console
> !
> !
> !
> ipx router nlsp area3
> area-address BB0000 FFFF0000
> !
> !
> no ipx router rip
> !
>
>
>
>
> spoke 2
>
> ipx routing 0000.0000.0005
> ipx internal-network BB5500
> !
> interface Ethernet0
> no ip address
> no ip mroute-cache
> ipx network BB7700
> ipx nlsp area3 enable
> !
> interface Serial0
> no ip address
> no ip mroute-cache
> encapsulation frame-relay
> no ip route-cache
> bandwidth 64
> ipx network BBBB00
> no frame-relay inverse-arp
> frame-relay map ipx BBBB00.0000.0000.0002 102 broadcast
> !
>
> ip classless
> no logging console
> !
> !
> ipx router nlsp area3
> area-address BB0000 FFFF0000
> !
> !
> no ipx router rip
> !
>
>
>
> HUB
>
> ipx routing 0000.0000.0002
> ipx internal-network BB2200
> !
> interface Loopback0
> no ip address
> no ip directed-broadcast
> ipx network AAAA03
> !
> interface Loopback1
> no ip address
> no ip directed-broadcast
> ipx network AAAA04
> !
> interface Ethernet0
> no ip address
> no ip directed-broadcast
> ipx network AAAA02
> ipx network AAAA01 encapsulation SAP secondary
> ipx nlsp area2 enable
> !
> interface Serial0
> bandwidth 64
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> no ip mroute-cache
> ipx network BBBB00
> frame-relay map ipx BBBB00.0000.0000.0003 103 broadcast
> frame-relay map ipx BBBB00.0000.0000.0005 105 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> !
> !
> !
> !
> ipx router nlsp area3
> area-address BB0000 FFFF0000
> !
> !
> ipx router nlsp area2
> area-address AAAA00 FFFFFFF0
> !
> !
> no ipx router rip
> !
> !
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:34 GMT-3