From: Chun-Yu Chen (chunyuchen@xxxxxxxxxxx)
Date: Wed May 09 2001 - 00:02:52 GMT-3
Hello,
You must enable "clns routing" in the global and type the "clns router isis
1" in the interface between the level1 and level 2.
Then level2 router will auto inject the default route to level 1 router.
you don't nees use "redistribution" command
Jerry
----- Original Message -----
From: "Jaeheon Yoo" <kghost@chollian.net>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, May 08, 2001 1:05 PM
Subject: How to inject a default route into ISIS level-1?
> Hi, all
> I have two isis routers A,B.
> A is a level-1 router and B is a level-1-2 router. They are connected via
a
> serial connection
> B is also connected to another router which is not running ISIS.
> So, B's level 1 LSP is not marked with ATT bit set.
> Therefore, even if both A and B is enabled with "clns router isis", it
> doesn't do what I want.
> And "default-information originate" won't be redistributed into level-1.
>
> How can I inject a default route into ISIS level-1 only router?
>
> Thanks in advance.
>
> Regards,
> Jaeheon
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3