From: Lachlan Kidd (lkidd@xxxxxxxxxxxxxxxxxxx)
Date: Wed May 09 2001 - 08:22:06 GMT-3
Hi All,
A couple of things
a) I had the same problem. It's because R6 already has an interface in the
15.0.0.0 network. If you shut it down you will learn the route to the
15.0.0.0/8 network. It's IGRPs classful nature, the moment it travel across
the serial link, it loses the mask (b/c the link is in a different network).
I think what happens is that IGRP rx's the route with a /8 mask, sees that
the router already has the 15.0.0.0 network with a /24 and discards the
route (masks don't match).
b) Xander, that command does not show up under 12.07(T) for IGRP. Is that
new or am I missing the point?
HTH
Lachlan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
xander
Sent: Wednesday, 9 May 2001 6:23:PM
To: Joe Shmoe
Cc: ccielab@groupstudy.com
Subject: Re: CCBootcamp Lab 17 question
Hello Joe,
JS> Hi All,
JS> In Lab 17, R8 and R6 are running IGRP. I've tried to
JS> get the loopback0 interface on R8 to show up on R6 via
JS> IGRP and can't get it to work.
JS> Anyone else had this problem? It might be an IGRP
JS> issue, but I can't tell.
Use 'neighbor x.x.x.x update-source Loopback0'
-- WBW, xander mailto:xander@adt.ru CCNA, CCNP+VoiceAccess, CCIE second attempt in Brussels 9-10, July, 2001... **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3