From: Rena A. hu (huaq@xxxxxxxxxxx)
Date: Thu May 10 2001 - 18:04:03 GMT-3
I found that frame-relay traffic-rate will override frame cir/bc/be
configuration. I have the following cfg on my frame map-class command.map-class
frame-relay test
frame-relay traffic-rate 48000 64000
no frame-relay adaptive-shaping
frame-relay cir 48000
frame-relay bc 6000
frame-relay be 2000 From my understanding, bc=cir*TC=48000/8=6000. But
the following output of command sh frame pvc 100 tell me bc=cir even I
have time interval set to 125ms. Can every one tell me why??? Thanks a
lot, r5#sh frame pvc 100PVC Statistics for interface Serial0 (Frame Relay
DTE)DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0 input pkts 221 output pkts 231 in bytes 21668
out bytes 21508 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 40 out bcast bytes 2960
pvc create time 00:18:39, last time pvc status changed 00:18:39
cir 48000 bc 48000 be 16000 limit 2750 interval 125
mincir 24000 byte increment 750 BECN response no
pkts 110 bytes 9396 pkts delayed 0 bytes delayed 0
shaping inactive
Serial0 dlci 100 is first come first serve default queueing Output
queue 0/40, 0 drop, 0 dequeued
------------------------------------------------------------------------
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:38 GMT-3