From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Fri May 18 2001 - 12:29:19 GMT-3
configs please
----- Original Message -----
From: "Jeongwoo Park" <jpark@wams.com>
To: <ccielab@groupstudy.com>
Sent: Friday, May 18, 2001 7:58 AM
Subject: point to point T1 troubleshooting.
> Hi all
> Have anyone troubleshootted T1?
> it is ppp encapsulation, leased line.
> LEC(local exchange carrier) said circuit is fine, which I doubt.
> Router config is fine, I believe.
> here is output of "sh int s2/0"
>
>
> #sh int s2/0
> Serial2/0 is up, line protocol is down
> Hardware is M4T
> Description: Leased Line to branch
> Internet address is 10.10.14.86/30
> MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation PPP, crc 16, loopback not set
> Keepalive set (10 sec)
> LCP Listen
> Closed: IPCP, CDPCP
> Last input never, output 00:00:03, output hang never
> Last clearing of "show interface" counters 18:08:32
> Input queue: 0/75/0 (size/max/drops); Total output
> drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max
> total/threshold/drops)
> Conversations 0/1/256 (active/max active/max
> total)
> Reserved Conversations 0/0 (allocated/max
> allocated)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 2368 giants, 0
> throttles
> 8940 input errors, 1913 CRC, 0 frame, 6028
> overrun, 0 ignored, 999 abort
> 13556 packets output, 189784 bytes, 0 underruns
> 0 output errors, 0 collisions, 3438 interface
> resets
> 0 output buffer failures, 0 output buffers
> swapped out
> 3672 carrier transitions DCD=up DSR=up
> DTR=up RTS=up CTS=up
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3