From: Jon Carmichael (jonc@xxxxxxxxxxx)
Date: Mon May 21 2001 - 17:46:15 GMT-3
Working Lab 7.
Trying to make RIPV2 authentication work with key-chains and MD5, --I have
both ends configured identically, --I have tried more than one key chain in
case I made an invisible char typo, -same result. Configs and debugs to
follow.
!
hostname Lab7-R2
!
!
no ip domain-lookup
!
key chain RIPAUTH
key 1
key-string 7 fred
key chain SPANKY
key 1
key-string 7 fred
!
interface Ethernet0
ip address 10.14.0.1 255.255.255.0
!
interface Serial0
ip address 10.101.1.2 255.255.0.0
encapsulation frame-relay
ip ospf priority 0
frame-relay interface-dlci 410
!
interface Serial1
ip address 10.21.1.1 255.255.0.0
ip rip authentication mode md5
ip rip authentication key-chain SPANKY
encapsulation ppp
!
interface TokenRing0
ip address 192.168.3.1 255.255.255.0
shutdown
ring-speed 16
!
router ospf 1
redistribute rip metric 22 subnets route-map RIP2OSPF
network 10.101.1.2 0.0.0.0 area 0
network 10.14.0.1 0.0.0.0 area 2
default-information originate metric 200 metric-type 1
!
Lab7-R2#config t
Enter configuration commands, one per line. End with CNTL/Z.
Lab7-R2(config)#debug ip rip
^
% Invalid input detected at '^' marker.
Lab7-R2(config)#end
Lab7-R2#debug ip r
%SYS-5-CONFIG_I: Configured from console by console
Lab7-R2#debug ip rip
RIP protocol debugging is on
Lab7-R2#
RIP: received packet with MD5 authentication
RIP: ignored v2 packet from 10.21.1.2 (invalid authentication)
RIP: sending v2 update to 224.0.0.9 via Ethernet0 (10.14.0.1)
10.3.0.0/16 -> 0.0.0.0, metric 2, tag 0
10.21.1.2/32 -> 0.0.0.0, metric 1, tag 0
10.21.0.0/16 -> 0.0.0.0, metric 1, tag 0
10.100.0.0/16 -> 0.0.0.0, metric 2, tag 0
10.101.0.0/16 -> 0.0.0.0, metric 1, tag 0
RIP: sending v2 update to 224.0.0.9 via Serial1 (10.21.1.1)
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:48 GMT-3