From: Brian (signal@xxxxxxxxxx)
Date: Sun Jun 17 2001 - 14:41:34 GMT-3
You need to have a dialer map for the route you are watching.
add:
dialer map ip 10.2.2.0 255.255.255.0 name r2 broadcast 53511676
to your config ( you can keep the original map as well), and
then this will work. I don't know if this is how things should be,
but from expereience (12.0.17) this is how you have to get it to work.
brian
On Sun, 17 Jun 2001, jack chen wrote:
> Hello,
> I'm working with dialer-watch backup for OSPF.
> It say that dialer-watch don't need intersting
> packet,right?
> But my config is not work ,the debug information
> told me 'no dialer map/string present in bri0
> interface'
> interface BRI0
> ip address 10.10.1.3 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 60
> dialer map ip 10.10.1.2 name r2 broadcast 53511676
> dialer hold-queue 50
> dialer watch-group 1
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication chap
> access-list 101 deny ip any host 255.255.255.255
> access-list 101 permit ip any any
> dialer watch-list 1 ip 10.2.2.0 255.255.255.0
> dialer-list 1 protocol ip list 101
>
>
> Why?
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:25 GMT-3