From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Sat Aug 04 2001 - 19:20:05 GMT-3
Hai All,
I have two routers directly connected over ethernet Running nlsp. I wanted
to make one of them DR. so I increase the priority to 85. But when I see in
"sh ipx nlsp nei" priority shows up to be 105. Can some one explain me why.
More importantly what could be its imlications.
r3#sh ipx nlsp nei
NLSP Level-1 Neighbors: Tag Identifier = notag
System Id Interface State Holdtime Priority Cir Adj Circuit Id
r2 Et0 Up 24 105 mc mc
r2.01
r3#
*******************************************
r2#
!
interface Ethernet0
ip address 137.8.6.130 255.255.255.192
ip access-group 101 in
no ip directed-broadcast
ipx network 123
ipx nlsp enable
ipx nlsp priority 85 <<<<----------------
bridge-group 1
*******************************************
Thanks in advance
Devender Singh
BE(Hons), CCNP
IP Solution Specialist
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3