From: Zeng Puyang (zbridge98@xxxxxxxxx)
Date: Mon Aug 06 2001 - 14:28:07 GMT-3
But the ipx output-sap-filter worked for me in the similar topology. Are you su
re you clear the ipx sap table on R3? It will stay there for 3 minutes after yo
u block the further sap advertise.
Regards
Zeng Puyang
----- Original Message -----
From: "BRZYSKI, ADAM E (SWBT)" <ab1723@sbc.com>
To: "groupstudy" <ccielab@groupstudy.com>
Sent: Tuesday, August 07, 2001 12:11 AM
Subject: RE: "ipx output-sap-filter"and "distribute-sap-list out "
> I've had the same problem. I am using IOS 12.0.17.
>
> In the following topology
>
>
> R1------R2-----R3
>
> If I configure a static SAP on R1 and want to filter it on R2 such that it
> does not propagate to R3 I am unable to do it.
>
> I have tried using both ipx output-sap-filter as well distribute-sap-list
> out. It seems not to work.
>
> Has anybody else encountered a similar problem?
>
> Adam Brzyski
> Design Engineer II
> CCNP, CCDP, NNCDE
>
>
> -----Original Message-----
> From: Zeng Puyang [mailto:zbridge98@yahoo.com]
> Sent: Monday, August 06, 2001 10:53 AM
> To: groupstudy
> Subject: Re: "ipx output-sap-filter"and "distribute-sap-list out "
>
>
> I tried to use distribute-sap-list out under ipx eigrp. Unfortunately, it
> didn't work. Not sure if it's because of ios version. I tried on 12.0.14.
>
> Regards
>
> Zeng Puyang
> ----- Original Message -----
> From: "Chris Allen" <chris.allen@callisma.com>
> To: "?(,3(&("(2" <jackzhucl@citiz.net>; "groupstudy"
> <ccielab@groupstudy.com>
> Sent: Monday, August 06, 2001 9:27 PM
> Subject: RE: "ipx output-sap-filter"and "distribute-sap-list out "
>
>
> > ipx output-sap-filter - filters outgoing SAPs on the interface you
> configure
> > it on
> >
> > distribute-sap-list out - filters outgoing SAPs based on the routing
> > protocol you configure it under. For example if you are running ipx eigrp
> > and you configure a distribute list under eigrp, the specified SAPs will
> be
> > filter from every ipx eigrp interface.
> >
> > chris
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Vl3I
> > Az
> > Sent: Monday, August 06, 2001 5:44 AM
> > To: groupstudy
> > Subject: "ipx output-sap-filter"and "distribute-sap-list out "
> >
> >
> > Hi,everybody,
> > Who can tell me the difference between the two command"ipx
> > output-sap-filter"and "distribute-sap-list out ".
> > Thanks.
> >
> > jack
> > jackzhucl@263.net
> > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
> |:"f
> |g-J
> +~7&!"\"fv7,1+a6Zy
> _rj(}J&
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:46 GMT-3