From: jonatale@xxxxxxxxxxxxx
Date: Fri Aug 17 2001 - 03:41:06 GMT-3
cool!
...but what do:
EC, AYT, etc mean (in the telnet rfc?)
also
what is telnet IP
i had discovered that you can send a break out the rev telnet session w/
cntrl-shft-6,b so i guess i'd need to leave out the "^^" on the others too,
right?
Jerry Toomey wrote:
> On the Ctrl-Shift-6 command: if you type Ctrl-Shift-6, then "?", it will
> give you the help screen:
>
> ADSL-Router#
> [Special telnet escape help]
> ^^B sends telnet BREAK
> ^^C sends telnet IP
> ^^H sends telnet EC
> ^^O sends telnet AO
> ^^T sends telnet AYT
> ^^U sends telnet EL
> ADSL-Router#
>
> I've always used Ctrl-Shift-6, then "c".
>
> Jerry
>
> --- Denise Donohue <fradendon@home.com> wrote:
> > The command to stop the trace is just ctrl-shift-6. Adding the x tells
> > the
> > router to suspend (not close) the telnet session and returns you to the
> > originating router/switch.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Jason Sinclair
> > Sent: Wednesday, August 15, 2001 11:20 PM
> > To: 'Annu'; ccielab@groupstudy.com
> > Subject: RE: Traceroute & Termserver
> >
> >
> > Annu,
> >
> > In the term config set thet term emulation to vt-220.
> >
> > Regards,
> >
> > Jason Sinclair
> > Team Leader - NSG
> > POWERTEL Limited
> > Level 11, 55 Clarence Street, SYDNEY
> > Phone: 61-2-8264-3820
> > Mobile: 0416 105 858
> > jasons@powertel.net.au
> >
> >
> >
> > -----Original Message-----
> > From: Annu [mailto:annu_roopa@yahoo.com]
> > Sent: Thursday, 16 August 2001 12:45
> > To: ccielab@groupstudy.com
> > Subject: Traceroute & Termserver
> >
> > Group,
> >
> > May be this has been discussed,but could not find it
> > in archives.
> >
> > Q1. I have got a Termserver to router connection and
> > when trying to terminate a traceroute in router( with
> > Ctrl+shift 6 x) it comes back to TS rather than break
> > the traceroute.What is the solution ? as the
> > traceroute continues....
> >
> > Example:
> > r9#traceroute 10.1.1.1
> > Type escape sequence to abort.
> > Tracing the route to 10.1.1.1
> >
> > 1 * * *
> > 2 * * *
> > 3 * * *
> > 4 * * *
> > 5 * * *
> > 6 * * *
> > 7
> > termsrver#
> > [Resuming connection 3 to r9 ... ]
> > *
> >
> > Q2. I am using hyperterm with win2K and somehow my
> > arrow keys dont work to repeat or execute previous
> > cmds.Do i have to upgrade it or what am i missing.i
> > had done this before but seem to forget ?
>
> =====
> Jerry Toomey of http://www.wansend.com can be reached at 949-439-4685
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:52 GMT-3