From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Sat Aug 25 2001 - 21:20:16 GMT-3
Atakan,
Snapshot does not work with eigrp.
Devender Singh
BE(Hons), CCNP
IP Solution Specialist
-----Original Message-----
From: Atakan San [mailto:asan@cisco.com]
Sent: Sunday, 26 August 2001 9:52
To: CCIELAB@groupstudy.com
Subject: IPX-EIGRP issue
Hello Guys,
I hit a weird issue while testing IPX snapshot scenarios Everything is
working fine with IPX RIP but with EIGRP...No
after the end of active snapshot period I am losing my IPX routes on
my routing table
Here is the relevant config and appreciate your commends,
Thanks
Atakan
ROUTER 1M
interface BRI0
mac-address 0001.0001.0001
no ip address
encapsulation ppp
dialer map ipx 12.0002.0002.0002 broadcast 201
dialer-group 1
ipx network 12
no ipx route-cache
ipx watchdog-spoof
ipx spx-spoof
isdn switch-type basic-net3
snapshot server 5 dialer
ppp authentication chap
access-list 908 deny any any eigrp
access-list 908 deny any any 457
access-list 908 deny any any sap
access-list 908 permit any any
!
ipx router eigrp 1
network 31
network 12
network 11
!
!
ipx router rip
no network 12
no network 31
no network 11
dialer-list 1 protocol ipx list 908
ROUTER 2B
interface BRI0
mac-address 0002.0002.0002
no ip address
encapsulation ppp
dialer map snapshot 1 200
dialer map ipx 12.0001.0001.0001 broadcast 200
dialer-group 1
ipx network 12
no ipx route-cache
ipx watchdog-spoof
ipx spx-spoof
isdn switch-type basic-net3
snapshot client 5 8 dialer
ppp authentication chap
access-list 908 deny any any eigrp
access-list 908 deny any any 457
access-list 908 deny any any sap
access-list 908 permit any any
ipx router eigrp 1
network 32
network 12
network 22
!
!
ipx router rip
no network 12
no network 22
no network 32
dialer-list 1 protocol ipx list 908
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3