From: Shane Miles (smiles@xxxxxxxxxx)
Date: Mon Oct 01 2001 - 17:51:20 GMT-3
See config below. I can dial between dial-peers 2 and 3 with no
problem in both directions. When I dial "725" I immediately get a fast-busy
every time. Debug ip packet shows nothing leaving the router when I dial
725 nor does my sniffer trace. However, I can recieve calls when the box at
10.1.1.30 dials 123 or 124. I can't post the config of that box because its
not a Cisco router. When I shutdown the Ethernet interface it acts exactly
the same. Has anyone seen this?
voice-port 1/0/0
!
voice-port 1/0/1
!
!
dial-peer voice 2 pots
destination-pattern 123
port 1/0/1
!
dial-peer voice 3 pots
destination-pattern 124
port 1/0/0
!
dial-peer voice 5 voip
destination-pattern 725
session target ipv4:10.1.1.30
!
interface Ethernet0/1
ip address 10.1.1.102 255.255.255.0
-- Shane P. Miles **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:10 GMT-3