From: Batman (rschotz@xxxxxxxxxxx)
Date: Tue Oct 09 2001 - 02:59:04 GMT-3
You can do this a few times & get aood idea:
rschotz#sh ip eigrp timers 44
IP-EIGRP timers for process 44
Hello Process
Expiration Type
| 0.612 (parent)
| 0.612 Hello (FastEthernet0)
Update Process
Expiration Type
| 55.948 (parent)
| 55.948 Active check
rschotz#sh ip eigrp timers 44
IP-EIGRP timers for process 44
Hello Process
Expiration Type
| 4.754 (parent)
| 4.754 Hello (FastEthernet0)
Update Process
Expiration Type
| 50.784 (parent)
| 50.784 Active check
rschotz#
----- Original Message -----
From: "Ravi" <s_ravichandran@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, October 08, 2001 7:52 PM
Subject: Re: IP EIGRP Hello interval
> Are you sure? how come It doesn't show me any timers.
>
> Regards,
> Ravi
>
> ----- Original Message -----
> From: Thounda Craig, Jr. <hjcgroup@mindspring.com>
> To: 'Ravi' <s_ravichandran@hotmail.com>
> Sent: Monday, October 08, 2001 10:57 PM
> Subject: RE: IP EIGRP Hello interval
>
>
> > "Show ip protocol" will provide any routing process values.
> > More specifically, "show ip eigrp int" will provide the timers.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Ravi
> > Sent: Monday, October 08, 2001 10:22 PM
> > To: ccielab@groupstudy.com
> > Subject: IP EIGRP Hello interval
> >
> > Hi,
> >
> > What is the show command to see ip eigrp hello and hold interval?
Thanks,
> >
> > Regards,
> > Ravi
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:15 GMT-3