From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Mon Oct 15 2001 - 03:16:04 GMT-3
I want to know if there is a command to see this.
sho ipx interface will not show me it will only show the sap timer ,filter etc
Regards
At 09:32 AM 10/14/2001 -1000, Frank B wrote:
>Anthony,
> My first tip would be ALWAYS check the command reference for
> questions
>regarding the default for any ios command. Most often, almost always, the
>default doesn't show up in the config. Also, there's often several other
>interesting tid-bits of info you may find useful.
>-------------------
>1) ipx sap-incremental
>
>Defaults
>
>Enabled on serial interfaces
>
>Disabled on LAN media (Ethernet, Token Ring, FDDI)
>
>-------------------
>2) ipx split-horizon eigrp
>
>defaults
>
>enabled
>
>-------------------
>
>If you configure other than the default your command will (read shoud ;)
>show up in the config. Aloha, Frank
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>ohanusi anthony
>Sent: Sunday, October 14, 2001 4:43 PM
>To: ccielab@groupstudy.com
>Subject: split horizon
>
>
>Hi all ,
>is there a way to know if ipx sap-incremental split horizon is disable
>or enable on an interface.
>
>show the light
>
>Ohanusi Anthony CCNA,CCNP,CCIE Written.
>WAN Engineer
>
>Network Solution, A Schlumberger Company
>Email : <ohanusi@lagos.sns.slb.com>
>Phone : 234-1-2610446 EXT 3230
>Fax : 234-1-2621034
>Learn to qualify your statement
Ohanusi Anthony CCNA,CCNP,CCIE Written.
WAN Engineer
Network Solution, A Schlumberger Company
Email : <ohanusi@lagos.sns.slb.com>
Phone : 234-1-2610446 EXT 3230
Fax : 234-1-2621034
Learn to qualify your statement
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:18 GMT-3