From: Thomas Larus (tlarus@xxxxxxx)
Date: Thu Oct 25 2001 - 12:06:23 GMT-3
I am probably just showing my ignorance here, but I did not think that
snapshot routing was used with OSPF, but rather was something used with RIP.
You have ip ospf demand-circuit in your config. I have worked pretty hard
trying to get ospf demand-circuit to work right, but that is a completely
different matter from snapshot routing with RIP.
Thomas Larus
----- Original Message -----
From: "Kevin(>gC6?u)" <y1700@chollian.net>
To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Thursday, October 25, 2001 10:14 AM
Subject: Flapping after snapshot on the isdn bri
> isdn flapping is continued..
>
> i don't know the reason..
>
> config is here.
>
> interface BRI0
> ip address 137.3.53.1 255.255.255.252
> encapsulation ppp
> ip ospf demand-circuit
> ipx network 5B3
> no ipx route-cache
> ipx watchdog-spoof
> ipx spx-spoof
> no peer neighbor-route
> dialer idle-timeout 30
> dialer map snapshot 1 name r3 broadcast xxxxxxxx
> dialer map ipx 5B3.0003.0003.0003 name r3 broadcast xxxxxxxx
> dialer map ip 137.3.53.2 name r3 broadcast xxxxxxxx
> dialer load-threshold 128 either
> dialer-group 1
> snapshot client 5 120 dialer
> no fair-queue
> ppp authentication pap
> ppp pap sent-username r5 password 7 070C285F4D06
> ppp multilink
>
> another router is
>
> interface BRI0
> ip address 137.3.53.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 30
> dialer map ip 137.3.53.1 name r5 broadcast
> dialer map ipx 5B3.0005.0005.0005 name r5 broadcast
> dialer load-threshold 128 either
> dialer-group 1
> ipx network 5B3
> no ipx route-cache
> ipx watchdog-spoof
> ipx spx-spoof
> isdn switch-type basic-5ess
> no peer neighbor-route
> snapshot server 5
> ppp authentication pap
> ppp pap sent-username r3 password 7 045F02150C2E
> ppp multilink
>
>
>
> Flapping is continued...
>
> Please let me know...
>
> And another question is why I can't ping ipx 5b3.0003.0003.0003.
>
> Thanks.
>
> Regards.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:24 GMT-3