From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Fri Oct 26 2001 - 10:07:37 GMT-3
I came up with the same number that you did.
I have been trying to figure that out too.
Maybe they wanted to make sure it was higher than a 20% load?
Dan
>>> "Diehm, Brian" <Brian.Diehm@compaq.com> 10/25/01 10:42PM >>>
Working lab 7. The requirement is to bring up the isdn line if there is
a 20% load or higher. I come up with "dialer load-threshold 51 either"
but the answer key says " dialer load-threshold 52 either". Is this a
type-o or is there a reason it is like this. I used the formula
255*.20 to end up with 51. Is it general practice to round up one? Any
ideas?
Thanks,
Brian Diehm
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:25 GMT-3