From: Joe Lee (bgp@xxxxxxxxxxxx)
Date: Sat Oct 27 2001 - 20:08:13 GMT-3
   
Hi,
I use this command in the dialer profile and it can callback.
However, you need to know the caller's number.
dialer caller number callback
Joe
----- Original Message -----
From: "Charles Huang" <CharlesNY2000@Yahoo.Com>
To: <ccielab@groupstudy.com>
Sent: Sunday, October 28, 2001 6:21 AM
Subject: PPP callback Server with Dialer Profile
> Hi,
>
> Many of the PPP callback secnarios I found on CCO uses Legacy DDR.  So I
tried
> PPP callback using Dialer Profile with no luck.  Then I convert it to
Legacy
> DDR and it works.  I was wondering if PPP callback can be configured using
> Dialer Profile.  Below are part of my configs.  Maybe somebody can point
out
> where I did wrong.
>
> Thanks
>
> ! ppp callback client
> !
> hostname r4
> !
> username r2 password 0 ccie
> !
> interface BRI0/0
>  no ip address
>  encapsulation ppp
>  dialer pool-member 44
>  isdn switch-type basic-ni
>  isdn spid1 0835866201 8358662
>  isdn spid2 0835866401 8358664
>  ppp authentication chap
> !
> interface Dialer3
>  ip address 192.168.3.4 255.255.255.0
>  encapsulation ppp
>  dialer pool 44
>  dialer remote-name r2
>  dialer idle-timeout 30
>  dialer string 8358661
>  dialer-group 1
>  ppp callback request
>  ppp authentication chap
> !
> dialer-list 1 protocol ip permit
>
>
>
>
> ! ppp callback server
> !
> hostname r2
> !
> username r4 password 0 ccie
> !
> interface BRI0/0
>  no ip address
>  encapsulation ppp
>  dialer pool-member 123
>  isdn switch-type basic-ni
>  isdn spid1 0835866101 8358661
>  isdn spid2 0835866301 8358663
>  ppp authentication chap
> !
> interface Dialer1
>  ip address 192.168.3.2 255.255.255.0
>  encapsulation ppp
>  dialer pool 123
>  dialer remote-name r4
>  dialer callback-secure
>  dialer idle-timeout 30
>  dialer string 8358662 class CALLBACK
>  dialer-group 1
>  ppp callback accept
>  ppp authentication chap
> !
> map-class dialer CALLBACK
>  dialer callback-server username
> !
> dialer-list 1 protocol ip permit
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3