Question on DLSW+

From: Choi, Howard CW (Howard.CW.Choi@xxxxxxxx)
Date: Mon Oct 29 2001 - 23:33:05 GMT-3

• Next message: Brian Hescock: "Re: Redistributing only even subnets."
• Previous message: Albert Lu: "RE: Redistributing only even subnets."
• Next in thread: Geir Jensen: "RE: Question on DLSW+"
• Maybe reply: Geir Jensen: "RE: Question on DLSW+"
• Maybe reply: Bauer, Rick: "RE: Question on DLSW+"
• Maybe reply: Jim Brown: "RE: Question on DLSW+"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Group,

Suppose a DLSW+ TCP connection has been setup between R1(E0) to R2(To0). I
would like to allow only source mac-addresses in the range 4000.1000.xxxx to
4000.2000.xxxx on interface E0 of R1 to use this DLSW+ connection to reach
R2.

Please advise any feasible methods to achieve. Thanks.

Howard Choi
CCNP, CCDP

• Next message: Brian Hescock: "Re: Redistributing only even subnets."
• Previous message: Albert Lu: "RE: Redistributing only even subnets."
• Next in thread: Geir Jensen: "RE: Question on DLSW+"
• Maybe reply: Geir Jensen: "RE: Question on DLSW+"
• Maybe reply: Bauer, Rick: "RE: Question on DLSW+"
• Maybe reply: Jim Brown: "RE: Question on DLSW+"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:28 GMT-3