From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Fri Nov 02 2001 - 05:10:16 GMT-3
In the 'dlsw remote-peer 4 tcp n.n.n.n' command, 4 is a Port-List with an
ethernet interface defined in it (see below). Using the port-list in this
fashion, does it negate having to use the bgroups routine to allow remote
traffic to get to an ethernet LAN on the local router, or must we use both?
dlsw port-list 4 Ethernet0
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:01 GMT-3