From: Henry (henryd31@xxxxxxxx)
Date: Wed Nov 14 2001 - 00:40:23 GMT-3
Hi there,
I have an issue where I have DLSW established between r1 and r2, there
is a Windows/NetBEUI PC on each end.
Both r1 and r2 connect to each other thru r5 and r6 over ISDN. My ISDN
DDR keeps on coming up with DLSW peers as the reasons
For dialing. Please let me know what I can be missing here.
R1
dlsw local-peer peer-id 100.100.100.1
dlsw remote-peer 0 tcp 200.200.200.1 keepalive 0 timeout 5 dynamic
inactivity 1
dlsw bridge-group 1
dlsw netbios-keepalive-filter
interface FastEthernet0/1
no ip address
no ip directed-broadcast
bridge-group 1
bridge 1 protocol ieee
R5
interface BRI0/0
no ip address
no ip directed-broadcast
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
isdn fast-rollover-delay 1
ppp authentication chap
ppp chap hostname r5-alias
ppp multilink
interface Dialer1
ip address 11.11.11.5 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf demand-circuit
dialer remote-name r6
dialer idle-timeout 70
dialer string 8358662
dialer pool 1
dialer-group 1
ppp callback accept
ppp authentication chap
ppp chap hostname r5-alias
ppp multilink
R6
interface BRI0/0
no ip address
no ip directed-broadcast
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
no peer neighbor-route
ppp authentication chap
ppp multilink
interface Dialer1
ip address 11.11.11.6 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer remote-name r5-alias
dialer idle-timeout 70
dialer string 8358661
dialer pool 1
dialer-group 1
ppp authentication chap
ppp multilink
R2
dlsw local-peer peer-id 200.200.200.1
dlsw remote-peer 0 tcp 100.100.100.1 keepalive 0 timeout 5 dynamic
inactivity 1
dlsw bridge-group 1
dlsw netbios-keepalive-filter
bridge 1 protocol ieee
interface FastEthernet0/1
no ip address
no ip directed-broadcast
bridge-group 1
"show dialer" always shows :
BRI0/0:1 - dialer type = ISDN
Idle timer (70 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=200.200.200.1, d=100.100.100.1)
Interface bound to profile Dialer1
Current call connected 00:00:50
Connected to 8358661 (r5-alias)
Thanks.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3