From: Bill Hill (bhill@xxxxxxxxxx)
Date: Wed Dec 05 2001 - 11:32:46 GMT-3
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip host testhost 1.1.1.1
Router(config)#busy-message testhost $
Enter TEXT message. End with the character '$'.
This host is busy, come back later.$
Router(config)#exit
Router#testhost
This host is busy, come back later.
Router#
HTH.
-Bill
-----Original Message-----
From: Christopher Dosch [mailto:chrisdosch@va.prestige.net]
Sent: Wednesday, December 05, 2001 5:22 AM
To: Ccielab
Subject: Telnet Message
Has anybody been able to get the busy-message or refuse-message
commands to work with telnet? I've read the doc's on cco but just can't
make it work, any help would be much appreciated!!
Chris
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:38 GMT-3