From: Rajeev Siddappa (raj_lab@xxxxxxxxx)
Date: Mon Dec 10 2001 - 17:41:31 GMT-3
I think it should work on 12.1 (x) code.
Rajeev.
--- "Bauer, Rick" <BAUERR@toysrus.com> wrote:
> I think those are the only ways to change the hello
> timers. The only other
> timer would be the spf timers. Can you force your
> network type to point to
> point by other configuration, ie Frame relay
> subinterface or p-to-p serial?
>
> -----Original Message-----
> From: routerkid [mailto:routerkid@adelphia.net]
> Sent: Monday, December 10, 2001 12:28 PM
> To: Bauer, Rick
> Subject: Re: Lab 20 setting ospf hello interval
>
>
> as stated below, you can not use that command...
>
> I tried the dead timer adn the hello's do not follow
> ...
>
> Bauer, Rick wrote:
>
> > Interface xx
> > ip ospf network point-to-point
> >
> > -----Original Message-----
> > From: routerkid [mailto:routerkid@adelphia.net]
> > Sent: Monday, December 10, 2001 12:05 PM
> > To: ccie spoon; ccielab@groupstudy.com
> > Subject: Re: Lab 20 setting ospf hello interval
> >
> > When I checked the bootcamp lab solution, THEY
> used the IP OSPF HELLO
> > COMMAND
> > in the solution which is not allowed. .
> >
> > Any feedback from the BootCamp Authors ?
> >
> > ccie spoon wrote:
> >
> > > Hi
> > > Try changing the dead timers and see whether the
> hello ones follow suit.
> > >
> > > spoon
> > >
> > > >From: routerkid <routerkid@adelphia.net>
> > > >Reply-To: routerkid <routerkid@adelphia.net>
> > > >To: ccielab@groupstudy.com
> > > >Subject: Lab 20 setting ospf hello interval
> > > >Date: Mon, 10 Dec 2001 10:41:40 -0500
> > > >
> > > >In CCBootcamp lab 20 ospf config requests that
> we change the ospf hello
> > > >timers to 10 seconds without using the
> ip-ospf-hello command. In
> > > >addition, you may not use the IP OSPF NET
> command as dictated in an
> > > >earlier step.
> > > >
> > > >I tried the dead interval which has no affect
> on the hello timers. So,
> > > >No ip ospf-hello
> > > >NO IP OSPF NET statements
> > > >
> > > >HOW ?
> > >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:41 GMT-3