From: wen jia yang (tonyblair@xxxxxxxxx)
Date: Wed Dec 26 2001 - 22:13:18 GMT-3
Actually I couldn't solve the problem, all things are well defined and encapsul
ated,nothing wrong here,no subinterfaces,inverse-arp enabled.
the interfaces in fr switch are all dce and I set the clock,leaving the client
interfaces at default DTE mode.
I have mentioned that when I put the exam config to another set of routers in m
y homelab,it works very well.
But one thing may be noticeable,I use RS-232 cable.
Router#sh control s 0
HD unit 0, idb = 0xB688E4, driver structure at 0xB6DD60
buffer size 1524 HD unit 0, RS-232 DTE cable
cpb = 0x4, eda = 0xC140, cda = 0xC000
RX ring with 16 entries at 0x404C000
.................................
Is it where the problem arises?Personally I don't think so.what do you guys&gir
ls say??
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'tom cheung'" <tkc9789@hotmail.com>; <scfeldberg@hotmail.com>; <tonyblair@
etang.com>; <ccielab@groupstudy.com>
Sent: Thursday, December 27, 2001 12:00 AM
Subject: RE: frame relay pvc inactive
> You don't need to do that. LMI transfers that information. If you are
> creating subinterfaces and want a particular DLCI and only that one to go
> there, THEN you put that commmand in. Otherwise, it's not necessary as all
> DLCI's will default to the main serial interface.
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> tom cheung
> Sent: Wednesday, December 26, 2001 10:22 AM
> To: scfeldberg@hotmail.com; tonyblair@etang.com; ccielab@groupstudy.com
> Subject: Re: frame relay pvc inactive
>
>
> wen jia yang,
> Config for the frame switch is fine. You need to add the following to
> serial0 for both routerA and routerB:
>
> frame-relay interface-dlci xxx, where xxx is 200 for routerA and 210 for
> routerB.
>
> HTH
>
> Tom
>
> >From: "Stephen C. Feldberg" <scfeldberg@hotmail.com>
> >Reply-To: "Stephen C. Feldberg" <scfeldberg@hotmail.com>
> >To: "wen jia yang" <tonyblair@etang.com>, <ccielab@groupstudy.com>
> >Subject: Re: frame relay pvc inactive
> >Date: Wed, 26 Dec 2001 09:47:28 -0500
> >
> >interface Serial0
> > no ip address
> > no ip directed-broadcast
> > encapsulation frame-relay
> > no ip mroute-cache
> >no ip mroute-cache
> > clockrate 64000
> > cdp enable
> > frame-relay lmi-type ansi
> > frame-relay intf-type dce <<<<<<<<<<<<<<<<
> > frame-relay route 200 interface Serial1 210
> >!
> >interface Serial1
> > no ip address
> > no ip directed-broadcast
> > encapsulation frame-relay
> > clockrate 64000
> > cdp enable
> > frame-relay lmi-type ansi
> > frame-relay intf-type dce <<<<<<<<<<<<<<<<<<
> > frame-relay route 210 interface Serial0 200
> >
> >
> >Although S0 and S1 are both DCE at the physical layer, only one side of the
> >FR connection can be frame-relay interface-type DCE. Removing the
> >statement
> >from either serial interface will resolve your problem.
> >
> >Steve
> >----- Original Message -----
> >From: "wen jia yang" <tonyblair@etang.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Monday, December 24, 2001 9:03 PM
> >Subject: frame relay pvc inactive
> >
> >
> > > RouterA s0------s0 FrameSwitch s1------s0 RouterB
> > > dlci 200 dlci210
> > >
> > > The following are the configs:
> > >
> >--------------------------------------------------------------------------
> >----------------------------------
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname FrameSwitch
> > > !
> > > !
> > > ip subnet-zero
> > > frame-relay switching
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface Serial0
> > > no ip address
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > no ip mroute-cache
> > > no ip mroute-cache
> > > clockrate 64000
> > > cdp enable
> > > frame-relay lmi-type ansi
> > > frame-relay intf-type dce
> > > frame-relay route 200 interface Serial1 210
> > > !
> > > interface Serial1
> > > no ip address
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > clockrate 64000
> > > cdp enable
> > > frame-relay lmi-type ansi
> > > frame-relay intf-type dce
> > > frame-relay route 210 interface Serial0 200
> > > !
> > > interface Serial2
> > > no ip address
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > clockrate 64000
> > > cdp enable
> > > frame-relay lmi-type ansi
> > > .
> > > .
> > > .
> > > line con 0
> > > exec-timeout 0 0
> > > transport input none
> > > line aux 0
> > > line vty 0 4
> > > no login
> > > !
> > > end
> > >
> >--------------------------------------------------------------------------
> >--------------------------------
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > service tcp-small-servers
> > > !
> > > hostname RouterA
> > > !
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface Ethernet0
> > > no ip address
> > > no ip directed-broadcast
> > > no ip route-cache
> > > interface Serial0
> > > ip address 192.1.1.1 255.255.255.0
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > no ip route-cache
> > > no ip mroute-cache
> > > frame-relay lmi-type ansi
> > > !
> > > interface Serial1
> > > no ip address
> > > no ip directed-broadcast
> > > no ip route-cache
> > > no ip mroute-cache
> > > clockrate 64000
> > > !
> > > interface TokenRing0
> > > no ip address
> > > no ip directed-broadcast
> > > no ip route-cache
> > > no ip mroute-cache
> > > shutdown
> > > router rip
> > > network 192.1.1.0
> > > network 193.1.1.0
> > > !
> > > ip nat translation timeout never
> > > ip nat translation tcp-timeout never
> > > ip nat translation udp-timeout never
> > > ip nat translation finrst-timeout never
> > > ip nat translation syn-timeout never
> > > ip nat translation dns-timeout never
> > > ip nat translation icmp-timeout never
> > > no ip classless
> > > !
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > transport input none
> > > line aux 0
> > > transport input all
> > > line vty 0 4
> > > no login
> > > !
> > > end
> > >
> >--------------------------------------------------------------------------
> >----------------------------------
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname RouterB
> > > !
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > frame-relay de-list 3 protocol ip gt 512
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface Ethernet0
> > > no ip address
> > > no ip directed-broadcast
> > > !interface Serial0
> > > ip address 192.1.1.2 255.255.255.0
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > no ip mroute-cache
> > > frame-relay lmi-type ansi
> > > !
> > > interface Serial1
> > > no ip address
> > > no ip directed-broadcast
> > > clockrate 64000
> > > !
> > > router rip
> > > network 192.1.1.0
> > > !
> > > ip nat translation timeout never
> > > ip nat translation tcp-timeout never
> > > ip nat translation udp-timeout never
> > > ip nat translation finrst-timeout never
> > > ip nat translation syn-timeout never
> > > ip nat translation dns-timeout never
> > > ip nat translation icmp-timeout never
> > > no ip classless
> > > !
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > transport input none
> > > line aux 0
> > > exec-timeout 0 0
> > > line vty 0 4
> > > exec-timeout 0 0
> > > no login
> > > !
> > > end
> > >
> >--------------------------------------------------------------------------
> >----------------------------------
> > > RouterA#sh frame pvc
> > >
> > > PVC Statistics for interface Serial0 (Frame Relay DTE)
> > >
> > > DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
> >Serial0
> > >
> > > input pkts 65 output pkts 43 in bytes 8334
> > > out bytes 2382 dropped pkts 3 in FECN pkts 0
> > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > > in DE pkts 0 out DE pkts 0
> > > out bcast pkts 43 out bcast bytes 2382
> > > pvc create time 00:20:44, last time pvc status changed 00:19:35
> > >
> > > FrameSwitch#sh frame pvc
> > >
> > > PVC Statistics for interface Serial0 (Frame Relay DCE)
> > >
> > > DLCI = 200, DLCI USAGE = SWITCHED, PVC STATUS = INACTIVE, INTERFACE =
> >Serial0
> > >
> > > input pkts 47 output pkts 70 in bytes 2606
> > > out bytes 9066 dropped pkts 0 in FECN pkts 0
> > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > > in DE pkts 0 out DE pkts 0
> > > out bcast pkts 23 out bcast bytes 6486 Num Pkts
> >Switched
> >47
> > >
> > > pvc create time 00:22:30, last time pvc status changed 00:22:20
> > >
> > > PVC Statistics for interface Serial1 (Frame Relay DCE)
> > >
> > > DLCI = 210, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE =
> >Serial1
> > >
> > > input pkts 47 output pkts 70 in bytes 2580
> > > out bytes 9092 dropped pkts 0 in FECN pkts 0
> > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > > in DE pkts 0 out DE pkts 0
> > > out bcast pkts 23 out bcast bytes 6486 Num Pkts
> >Switched
> >47
> > >
> > > pvc create time 00:22:29, last time pvc status changed 00:22:19
> > > PVC Statistics for interface Serial2 (Frame Relay DCE)
> > >
> > >
> > > the dlci 200 pvc in always inactive,I check the frame switch but found
> >no
> >error there.all the encaps and lmi-types are match,anyone offer a hand?
> > > Thanks in Advance.
> > >
> > > Frankly speaking this is where I met in the lab in some training
> >centers,but when I move the identical config into my home lab,it works,all
> >the pvcs are active,can anyone tell what the problem is?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:47 GMT-3