From: David (david_knot@xxxxxxxxx)
Date: Fri Dec 28 2001 - 13:25:34 GMT-3
I can't seem to upgarde the IOS on a Cisco 7010(with 5
slots). It has IOS 10.3 at the moment. I've downloaded
12.0(20) GD from Cisco site under RSP7000/7500 secton.
When I try to load the router it compains that "Error:
wrong image for this platform". I've also tried other
variations of this IOS ver (see below).
Loading rsp-jsv-mz.120-4.T.bin
%SYS-3-CPUHOG: Task ran for 2908 msec (769/762),
Process = Boot Load, PC = 319F0
-Traceback= 164CD8 165246 16352E 1080 1000058E
%LINK-5-CHANGED: Interface Ethernet0/5, changed state
to administratively downf!
[OK - 10421560/57055976 bytes]
Error: wrong image for this platform
This router has RSP1. I wonder if the images I've been
trying are for RSP2. But then there is no mention of
this on Cisco site. Any ideas pls.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3