From: Scott Meeuwsen (scott@xxxxxxxxxxxx)
Date: Sun Feb 03 2002 - 20:01:42 GMT-3
Prabhat,
Yes, this is what I do and works very well (Unless you get a lab that needs a t
on of frame relay interfaces). I also use the AUX
port as an additional reverse telnet port using a cisco rollover. Remember you
need special cables for this as you need to get from
DB60 to RJ45. To do this I use one standard cisco rollover + 1 standard RJ45 t
o DB25F adapter (the one marked "Terminal" ) and 1
DB60 to DB25M cable (Cisco part #CAB-232MT. NOTE: these can be expensive... I r
ecommend www.anthonypanda.com). Hope this helps...
--Scott
----- Original Message -----
From: "Prabhat Sen" <senprabhat@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 03, 2002 11:13 AM
Subject: 2522 as a Frame Relay switch & Terminal Server
> Cisco 2522 router has 2 sych and 8 synch/asynch
> ports.We intend to use the synch 0 and 1 and 2 asynch
> ports as frame relay switch. The remaianing 6
> synch/asynch ports (assuming that 6 ports are
> sufficient), we intend to use them as asynch terminal
> server ports. Is this possible?
>
> Pls send yr comments and advice,
>
> Thanks,
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3