From: Antonio Marfil (tony.marfil@xxxxxxxxxxxxxxx)
Date: Mon Feb 04 2002 - 22:02:20 GMT-3
Someone here can probably help me with this. I'm getting lost trying to
find an answer on Cisco's site.
I have a 2901 switch and I want to upgrade the outdated CatOS on it to
something a little closer to what I'm going to see on the real lab.
Do I need to upgrade the Ram or FLash? What's the latest image that I can
run on this switch?
Thanks for your help,
Tony
Here's what I have:
Console> (enable) sh ver
WS-C2900 Software, Version McpSW: 3.2(2) NmpSW: 3.2(2)
Copyright (c) 1995-1998 by Cisco Systems
NMP S/W compiled on Aug 7 1998, 11:43:53
MCP S/W compiled on Aug 07 1998, 11:47:44
System Bootstrap Version: 2.1
Hardware Version: 1.8 Model: WS-C2900 Serial #: 004097036
Module Ports Model Serial # Hw Fw Fw1 Sw
------ ----- ---------- --------- ------ ------- ------- -------------------
-
1 2 WS-X2900 004097036 1.8 2.1 2.1(4) 3.2(2)
2 12 WS-X2901 004096270 1.0 1.4 3.2(2)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 8192K 7469K 723K 4096K 3584K 512K 256K 105K 151K
Uptime is 0 day, 0 hour, 2 minutes
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3