From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Thu Feb 07 2002 - 14:40:31 GMT-3
Ok, sorry for this that I think was just covered on igrp and perhaps too
basic a question. I have two routers. Router 'A' has loopback
15.15.1.1/24. Router 'B' has loopback 15.15.2.2. the serial interface
between the two routers is 10.1.1.0/24. igrp is running for the 10.0.0.0
and 15.0.0.0 networks on both routers. Normally the routes don't exchange
so I have a secondary address of 15.15.3.0/24 running between the two
routers. Now I can see the loopbacks in the routing table on each router
but I can't ping them. Can't ping the secondary address on the serial line
either. Never used secondary addresses before. What's wrong? I think
someone just got this to work but I can't.
Thanks in advance.
GW
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:14 GMT-3