From: Emmanuel Oppong (e-oppong@xxxxxxxxx)
Date: Fri Feb 08 2002 - 22:48:01 GMT-3
Admin distance of eigrp is 90 and that of ospf is 110. Just manipulate
admin distances for the 2 ptotocols. Give eigrp routes an admin dstance
higher than 110, say 150.
eg
router eigrp 100
distance 150.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Arthur Chan
Sent: Friday, February 08, 2002 5:09 PM
To: ccielab@groupstudy.com
Subject: Prefer OSPF learned route over EIGRP
Topology:
|
F/R Serial |tok ring 200(runs OSPF)
R3-------|--------R6
| |eth
| F/R Ser |
R4------- R2
|--------| tok ring 100
Connections b/t R3,R4, R6, R2-R4 tok ring, and R6 tok
ring 200 runs OSPF. R2-R6 eth and R2-R4 F/R Ser runs
EIGRP.
How does one prefer an OSPF learned route over EIGRP?
For example R6's tok ring 200 attached clients would
like to take the path from R6 via R4(running OSPF) to
reach tok ring 100, instead of R6 via R2(running
EIGRP).
Thanks,
Art
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:16 GMT-3