From: test test (temp_ottawa@xxxxxxxx)
Date: Fri Feb 15 2002 - 01:48:33 GMT-3
*** You can specifie an escape caractere to you
console, aux or vty an brack a ping quickly
command: escape 27 will let you press the esc key to
break your ping.
To break a telnet quickly use the command ip tcp
synwait-time 5
Regards
Regent
--- "Lupi, Guy" <Guy.Lupi@eurekaggn.com> wrote:
> Any idea on how to escape out of a telnet attempt?
>
> ~-----Original Message-----
> ~From: Steven M. Sowell [mailto:ssowell@gate.net]
> ~Sent: Thursday, February 14, 2002 6:35 PM
> ~To: Erich Borchert; ccielab@groupstudy.com
> ~Subject: RE: How do I kill a ping sequence early?
> ~
> ~
> ~However, if you are telnetted to a router that is
> pinging,
> ~'ctrl-shift-6-x'
> ~suspends your telnet session. To end a ping while
> you are
> ~telnetted to a
> ~router, use 'ctrl-shift-6-6'
> ~Steven Sowell
> ~CCIE#7317
> ~
> ~-----Original Message-----
> ~From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> ~Erich Borchert
> ~Sent: Wednesday, February 13, 2002 4:10 PM
> ~To: ccielab@groupstudy.com
> ~Subject: Re: How do I kill a ping sequence early?
> ~
> ~
> ~ctrl-shift-6-x
> ~----- Original Message -----
> ~From: "Paul Andersen" <pandersen3@hotmail.com>
> ~To: <ccielab@groupstudy.com>
> ~Sent: Wednesday, February 13, 2002 12:15 PM
> ~Subject: How do I kill a ping sequence early?
> ~
> ~
> ~> Gang,
> ~>
> ~> Anyone know the key sequence to kill a ping
> early, so I
> ~don't have to wait
> ~> for it to finish?
> ~>
> ~>
> ~> Thanks,
> ~> Paul Andersen
> ~> pandersen3@hotmail.com
> ~>
> ~>
> ~>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:23 GMT-3