Port Application Mapping

From: hSzeto Jeff (jytszeto@xxxxxxxxxxx)
Date: Tue Feb 19 2002 - 03:49:46 GMT-3

• Next message: David Siwula: "help w/demand circuit for x^99999 time"
• Previous message: Luke: "RE: NSG 2-144E ISDN emulator"
• Next in thread: Erick B.: "Re: Port Application Mapping"
• Maybe reply: Erick B.: "Re: Port Application Mapping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Group,

I have problems in setting up PAM. Please give me some advice.

r1----------r2-----PC

The pc will accept telnet on port 8000.
I configure : ip port-map telnet 8000 on r2, hoping that I can telnet the
pc from r1.
The result is when I can telnet to pc with or without the port-map command
when specify the port 8000, but cannot telnet when not specify the port,
even with the port-map command.
Someone please help me to understand PAM.

Thank you.

Jeff

• Next message: David Siwula: "help w/demand circuit for x^99999 time"
• Previous message: Luke: "RE: NSG 2-144E ISDN emulator"
• Next in thread: Erick B.: "Re: Port Application Mapping"
• Maybe reply: Erick B.: "Re: Port Application Mapping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:27 GMT-3