From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Wed Feb 20 2002 - 03:17:08 GMT-3
   
At 12:30 AM 2/20/2002 -0500, Giveortake@aol.com wrote:
>Anyone care to share the magic command that would allow me to see if I have
>two 4 mb flash modules or one 8 mb flash module in a 25xx?   Also pertaining
>to DRAM, I understand that some of the old boot proms don't support higher
>Dram.   How do I check that out.
>
>Moving into the DLSW and IPSEC stuff and its time to upgrade all the routers
>again.......  AAARRGGGGHHh.
>
>Thanks,
Keep in mind that you can boot your routers off of tftp... (DRAMs are cheaper t
han flash!)
Router>sho flash chips
8192K bytes of processor board System flash (Read ONLY)
   Chip    Bank    Code      Size      Name
    1      1       89A0      2048KB    INTEL 28F016SA
    2      1       89A0      2048KB    INTEL 28F016SA
    3      1       89A0      2048KB    INTEL 28F016SA
    4      1       89A0      2048KB    INTEL 28F016SA
Executing current image from System flash
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:28 GMT-3