From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Fri Feb 22 2002 - 20:38:09 GMT-3
yes u can do that.....
atleast ur cable should be connected and be in the state of DCE interface.
if u have s0 then :
interface s0
clokrate xxxx
no keepalive
loopback
no shut
-Mamoor
----- Original Message -----
From: Lupi, Guy <Guy.Lupi@eurekaggn.com>
To: 'Tim Szigeti' <szigeti@cisco.com>; <ccielab@groupstudy.com>
Sent: Saturday, February 23, 2002 3:47 AM
Subject: RE: serial up/up when not connected?
> Ok, I spoke too soon, doesn't work. Sorry.
>
> ~-----Original Message-----
> ~From: Tim Szigeti [mailto:szigeti@cisco.com]
> ~Sent: Friday, February 22, 2002 5:22 PM
> ~To: ccielab@groupstudy.com
> ~Subject: serial up/up when not connected?
> ~
> ~
> ~interesting question (Global Knowledge ACPC 2 - Prep Lab 1 - 1.2f):
> ~
> ~f) on R6 configure its serial 1 interface to be in the UP/UP state even
> ~though its not connected.
> ~
> ~
> ~this is easy with an ethernet (no keep) - but what's the trick for a
> ~serial?
> ~
> ~please let me know if you do.
> ~
> ~-tim
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3