From: Annu Roopa (annu_roopa@xxxxxxxxx)
Date: Sat Feb 23 2002 - 12:43:54 GMT-3
Rajeev,
May be wrong but just a couple of thoughts...
1. are u trying to do SRT or ST/TLB since its ethernet
an token ring both involved.
2.If u are trying SRT itself have u got the Ip address
of R1 and R4 in same subnet as its bridged ?? like is
it 10.10.10.6 and 10.10.10.x or something ?
Let us know.
Good luck,
Annu
--- RSiddappa@NECBNS.com wrote:
> Hi,
>
> I am trying to get this set up working, no results.
> Pls help.
>
>
>
>
R1-------To-----R2--------So-----------R3----------Eo---------R4
>
>
> R2 and R3 are tryig to do the transparent bridging
> Ip routing is
> disabled.
>
> R1 is trying to ping R4.
>
>
> Configs on R2 is
>
> interface Serial0
> no ip address
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> bridge-group 1
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> interface TokenRing0
> ip address 10.10.10.6 255.255.255.0
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> ring-speed 16
> bridge-group 1
> !
> !
> ip classless
> !
> !
> bridge 1 protocol ieee
> bridge 1 bitswap-layer3-addresses
> !
> line con 0
> privilege level 15
> password cisco
> login
> transport input none
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> And
>
> r3 is doign normal brdging.
>
> Pls tell me how can I make it work
>
> Rajeev.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3