From: Bill Greenwood (billgreenwood@xxxxxxxxxxxxx)
Date: Sat Feb 23 2002 - 14:45:49 GMT-3
   
All,
How do I verify the cost of a peer?
When I display capabilities I see what the remote-peer has configured on it
local-peer statement.
See below:
Configuration from router 1
R1#sh run | inc dlsw
dlsw local-peer peer-id 10.1.1.1 promiscuous
dlsw remote-peer 0 tcp 172.16.16.3 cost 2
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 1111.1111.1111 mask ffff.ffff.ffff
dlsw bridge-group 5
dlsw prom-peer-defaults cost 5
R1#
Show DLSW CAPabilities
R1#sh dlsw cap
DLSw: Capabilities for peer 172.16.16.3(2065)
  vendor id (OUI)          : '00C' (cisco)
  version number           : 2
  release number           : 0
  init pacing window       : 20
  unsupported saps         : none
  num of tcp sessions      : 1
  loop prevent support     : no
  icanreach mac-exclusive  : no
  icanreach netbios-excl.  : no
  reachable mac addresses  : none
  reachable netbios names  : none
  V2 multicast capable     : yes
  DLSw multicast address   : none
  cisco version number     : 1
  peer group number        : 0
  peer cluster support     : no
  border peer capable      : no
  peer cost                : 3
  biu-segment configured   : no
  UDP Unicast support      : yes
  Fast-switched HPR supp. : no
  NetBIOS Namecache length : 15
  local-ack configured     : yes
  priority configured      : no
  cisco RSVP support      : no
  configured ip address    : 172.16.16.3
  peer type                : conf
  version string           :
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS56I-L), Version 12.1(2), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 08-May-00 15:58 by linda
DLSw: Capabilities for peer 172.16.33.5(0)
  vendor id (OUI)          : '00C' (cisco)
  version number           : 2
  release number           : 0
  init pacing window       : 20
  unsupported saps         : none
  num of tcp sessions      : 1
  loop prevent support     : no
  icanreach mac-exclusive  : no
  icanreach netbios-excl.  : no
  reachable mac addresses  : none
  reachable netbios names  : none
  V2 multicast capable     : yes
  DLSw multicast address   : none
  cisco version number     : 1
  peer group number        : 0
  peer cluster support     : no
  border peer capable      : no
  peer cost                : 4
  biu-segment configured   : no
  UDP Unicast support      : yes
  Fast-switched HPR supp. : no
  NetBIOS Namecache length : 15
  local-ack configured     : yes
  priority configured      : no
  cisco RSVP support      : no
  configured ip address    : 172.16.33.5
  peer type                : conf
  version string           :
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS56I-L), Version 12.1(2), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 08-May-00 15:58 by linda
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3