From: Rob Rummel (Rummel@xxxxxxxxxxxxx)
Date: Sun Feb 24 2002 - 03:19:35 GMT-3
Just checking about Frame Relay Traffic Shaping
As per his solution and this was in the archives.
There should be a statement on the Interface for frame-relay
traffic-shaping
Am I correct in thinking you can not enable frame-relay traffic-shaping
on a sub interface. At lease I was not able to.
Once you apply frame-relay traffic-shaping on the interface your
enabling traffic shaping for all the sub interfaces VC's
The one you apply the class to ofcoarse with have the custom information
but all the rest stay at default.
Interface Se0/1.1
Access Target Byte Sustain Excess Interval Increment
Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
110 32 0 32 0 125 0
BECN
Interface Se0/1.23
Access Target Byte Sustain Excess Interval Increment
Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
130 56000 875 7000 0 125 875 -
120 56000 875 7000 0 125 875 -
r1#
Is there any way of only allowing traffic shaping on the sub interface
or VC?
Thanks......
Rob Rummel
-The faulty interface lies between the chair and the keyboard-
[GroupStudy.com removed an attachment of type image/gif which had a name of ima
ge001.gif]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:32 GMT-3