From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Mon Feb 25 2002 - 01:15:24 GMT-3
Jim,
Take a look at this link
http://www.cisco.com/warp/customer/104/25.shtml
<http://www.cisco.com/warp/customer/104/25.shtml>
As per 12.0.8 per interface authentication was added. Hope this helps.
Regards,
Jason Sinclair
Manager, Network Support Group
POWERTEL
Ground Level, 55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
* sinclairj@powertel.com.au
-----Original Message-----
From: Jim Newton [mailto:jnewton@InternetNOC.com]
Sent: Monday, 25 February 2002 12:22
To: Ccielab
Subject: OSPF authentication
I am working on a lab with three routers that are part of
the same subnet in
a point to multipoint frame configuration. The lab is asking
for me to set
up authentication between only two of the routers not all
three. Is there a
way to set up authentication on only certain devices in an
area and not all
of them? I have never seen this, so I am wondering if the
lab is wrong. But
I am the first to admit that there are lots of things out
there that I have
never seen before.
Jim Newton
Network Engineer
iNOC Inc
jnewton@internetnoc.com
work 608-663-4555
cell 608-516-6068
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:33 GMT-3