From: Paul Lalonde (plalonde2@xxxxxxxxx)
Date: Fri Mar 08 2002 - 13:41:04 GMT-3
Hi Guy,
How about turning on PVC auto discovery? That way, you should be able to
detect the PVCs configured on the ATM switch.
I think its atm ilmi-autodiscovery under the physical interface.
Hope this helps!
Paul
----- Original Message -----
From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
To: "'Paul Lalonde'" <plalonde2@cogeco.ca>; <ccielab@groupstudy.com>
Sent: Friday, March 08, 2002 11:00 AM
Subject: RE: ATM Interface Setup
> I don't have access to the LS1010, so there is no way for me to verify the
> setup unfortunately. It is on the IPExpert virtual rack.
>
> ~-----Original Message-----
> ~From: Paul Lalonde [mailto:plalonde2@cogeco.ca]
> ~Sent: Friday, March 08, 2002 11:16 AM
> ~To: Lupi, Guy; ccielab@groupstudy.com
> ~Subject: Re: ATM Interface Setup
> ~
> ~
> ~Hi Guy,
> ~
> ~Can you forward us the PVC list on the ATM switch? Make sure
> ~that the PVCs
> ~that you've defined on the routers (0/32) is the same on the
> ~ATM switch.
> ~
> ~Try a 'show atm pvc' or 'show atm map' on the LS1010. Also, check out:
> ~
> ~http://www.cisco.com/warp/public/121/ipoveratm.html
> ~
> ~and
> ~
> ~http://www.cisco.com/warp/public/121/index.shtm
> ~
> ~Hope this helps!
> ~
> ~Paul
> ~
> ~----- Original Message -----
> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
> ~To: <ccielab@groupstudy.com>
> ~Sent: Friday, March 08, 2002 10:20 AM
> ~Subject: ATM Interface Setup
> ~
> ~
> ~> I have some virtual rack time today, and it is my first time
> ~setting up
> ~ATM.
> ~> I am following a book that I have to set it up, I can't get
> ~it to work,
> ~the
> ~> interfaces are up but I can't ping the other side. There
> ~are 2 routers
> ~> connected to an LS1010 ATM switch, I included the configs
> ~below, I would
> ~> appreciate it if someone could tell me whether or not the configs are
> ~> correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
> ~>
> ~> hostname r9
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> ip subnet-zero
> ~> no ip finger
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> interface ATM0/0
> ~> no ip address
> ~> no atm ilmi-keepalive
> ~> !
> ~> interface ATM0/0.1 multipoint
> ~> ip address 6.9.6.9 255.255.255.0
> ~> map-group tor6
> ~> atm pvc 1 0 32 aal5snap
> ~> !
> ~> interface Ethernet1/0
> ~> no ip address
> ~> shutdown
> ~> !
> ~> interface Ethernet1/1
> ~> no ip address
> ~> shutdown
> ~> !
> ~> !
> ~> ip classless
> ~> ip http server
> ~> !
> ~> !
> ~> map-list tor6
> ~> ip 6.9.6.6 atm-vc 1 broadcast
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> line con 0
> ~> logging synchronous
> ~> transport input none
> ~> line aux 0
> ~> line vty 0 4
> ~> !
> ~> end
> ~>
> ~> r9#
> ~>
> ~>
> ~>
> ~> hostname r6
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> ip subnet-zero
> ~> no ip finger
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> interface ATM0/0
> ~> no ip address
> ~> no atm ilmi-keepalive
> ~> !
> ~> interface ATM0/0.1 multipoint
> ~> ip address 6.9.6.6 255.255.255.0
> ~> map-group tor9
> ~> atm pvc 1 0 32 aal5snap
> ~> !
> ~> interface Ethernet1/0
> ~> no ip address
> ~> shutdown
> ~> !
> ~> interface Serial1/0
> ~> no ip address
> ~> shutdown
> ~> !
> ~> !
> ~> ip classless
> ~> ip http server
> ~> !
> ~> !
> ~> map-list tor9
> ~> ip 6.9.6.9 atm-vc 1 broadcast
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> !
> ~> line con 0
> ~> logging synchronous
> ~> transport input none
> ~> line aux 0
> ~> line vty 0 4
> ~> !
> ~> end
> ~>
> ~> r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3